TRANSPARENT LED · DIRECT-VIEW LED
Transparent LED film, mesh, cabinet and laminated LED glass systems, plus indoor and outdoor LED walls. Configured and supplied by VITREVIA from China.
Start with where the display will be installed and whether the image surface should remain transparent. We then define the construction, model, dimensions, control, power, mounting and service access.
Choose a physical display construction. Some modular platforms support curved or corner geometry; the available radius or angle depends on the selected system. The final model, dimensions and supply scope are defined in the quotation.
Choose adhesive film for prepared glass or crystal film for curved and lightweight display structures.
An open, lightweight LED surface with minimal visible framing.
LED elements integrated into a new laminated glass assembly.
Serviceable modular displays for atriums, glass façades and larger transparent screen areas.
Open LED bars or mesh modules mounted across large exterior structures.
Modular LED walls for close-viewing interiors, outdoor media, curved structures, XR and cinema.
See how content runs across a rounded corner, two joined faces and a wide transparent LED wall.
CURVED LED SYSTEM
A freestanding LED display carries aquarium animation continuously around its rounded corner.
RIGHT-ANGLE TRANSPARENT LED
Two joined transparent LED faces carry one continuous animation.
TRANSPARENT LED WALL
Aircraft motion content plays across a wide indoor LED wall while the room remains visible through the screen.
Three LED formats in use: a curved retail screen, LED media on two faces of a high-rise building and an indoor media column.
A cylindrical LED screen wraps the curved corner of a retail building.
LED media surfaces run vertically across two adjacent faces of a high-rise building.
A tall LED installation wraps stacked surfaces with animated floral content in an atrium.
Compare platform groups by construction, environment and application. Each card covers one series or a closely related set; VITREVIA confirms the exact model and supplies the configured display system from China.
Showing all 14 platform groups
The rear construction determines how the display is supported, powered, connected and maintained.
We define the support structure, cable routes, power distribution and access for module replacement with the supplied display.
The quotation defines the inspection records and acceptance criteria for the selected assembly.
The system architecture defines playback, processing, signal distribution, receiving hardware, LED modules and power, together with the service-access plan.
Image and control path
A site photo or drawing, approximate dimensions and the intended viewing distance are enough to begin.
Show where the display will sit and the physical conditions around it.
Define how the image will be seen and what the screen must play.
Set the commercial and service inputs for the proposed system.
Use these pages to prepare content, specification, acceptance and delivery requirements.
Fit text, graphics and motion to the actual LED canvas and viewing distance.
Read the content guideCompare brightness, processing, structure, power, access and image quality.
Read the specification guideReview façade geometry, sightlines, ambient light and service access.
Explore the applicationDefine inspection evidence and shipment-release criteria for the selected system.
Review acceptancePlan packing, documents, spares, logistics and handover.
Review deliveryAnswers about quotation inputs, samples, timing, documents and support.
Read the buyer FAQLED display systems
Share the installation, approximate dimensions, viewing distance and target date. We will confirm the display construction and information needed for quotation.
