VITREVIA — A Rail-Rated Display Is Not a Qualified Window Assembly
Revision: 2026-09-11
Project: ____________________
Configuration / firmware: ____________________
Operator / date: ____________________
Agreed acceptance criteria: ____________________

TEST RECORD (repeat for each check)
Requirement ID:
Preconditions:
Test file / revision:
Action:
Expected result:
Observed result:
Evidence location:
Pass / Fail / Not tested:
Deviation and owner:
Retest / closure:

Guide: https://www.vitreviadisplays.com/insights/what-must-be-defined-before-quoting-a-rail-window-display/

REFERENCE TABLES
Boundary | Question before quoting | Evidence required
Vehicle power → electronics | Which input conditions, interruptions and protection requirements apply? | Vehicle interface specification and applicable test configuration
Electronics → vehicle network | What information, timing and recovery behaviour are required? | Protocol definition and interface test plan
Display → glass/mounting | Which assembly carries loads and controls tolerances? | Controlled glazing/mounting drawings and qualification responsibility
Assembly → environment | Which thermal, moisture, EMC and mechanical conditions apply? | Applicable requirements, test levels and representative sample definition
System → maintenance | Can the unit be removed and restored without an undocumented process? | Access study, replacement procedure and configuration record