VITREVIA DISPLAY MEASUREMENT / ACCEPTANCE RECORD
Blank project worksheet — complete one record per requirement.

Project / location:
Requirement ID / revision:
System model / serial numbers:
Assembly boundary (panel / cabinet / complete installed system):
Hardware revisions / firmware:
Configuration export / checksum:
Operating preset / brightness / colour settings:
Input resolution / frame rate / encoding / range / bit depth:
Test content filename / revision / checksum:
Method document / edition / section:
Deviations from method and their effect:
Ambient lighting / sensor orientation / temperature:
Warm-up time / stability criterion / measurement timing:
Instrument / serial / calibration date / uncertainty:
Instrument distance / angle / aperture:
Measurement-point map:

Acceptance limit and units:
Decision rule / uncertainty / guard band:
Raw readings and units:
Repeat readings:
Calculated result / formula:
Pass / fail / review:
Evidence filenames:

Factory or site test:
Performed by (project role) / date:
Witnessed by (project role):
Corrective action / owner / due date:
Retest scope / result:
Accepted deviations:
Handover configuration and supporting records: